Size comparison of two similar CFM dust collectors. ComPleat™ clean-side removal filter system (left) versus standard top-bag pulse-jet filter system (right).

Just one 36-inch-long ComPleat filter element does the work of nearly here 10-foot filter bags. Think of it: Changeouts with ComPleat filters are performed three to four times faster than standard filters - a real advantage when you have perform frequent changeouts.

That alone makes it the most convenient, easy-to-handle pulse-jet fabric filter system available. Its compact, pleated design provides up to 45-square-feet of filter area, allowing the ComPleat to operate at traditional 4:1 of 5:1 air-to-cloth ratios.

System is designed to fit your space requirements, even in low headroom situations.
On average just 12-feet-high, the low profile design of the ComPleat means it can be installed indoors. There are a number of advantages to this. The collector is protected from snow, rain, and wind damage, extending its life and reducing maintenance costs. In fact, you may not have to insulate the unit, which will significantly lower energy consumption.

Question: Can I retrofit my existing baghouse to a ComPleat system?
With ease. The ComPleat is easily retrofittable to existing baghouses - whether it's your Flex-Kleen unit or one of our competitiors'.

The ComPleat filter can accommodate any size or type of housing requirements: Round - for high vacuum or pressure - pyramid, or trough hopper. It can handle flow rates from 500 acfm to as high as 25,000 acfm.

Frequently it takes minimal changes to the tubesheet to accommodate the retrofit. It can be as easy as removing the old filters and slipping in the ComPleat elements. So switching to the High-efficiency ComPleat system is easy and cost-effective.